Automotive News & Information - K B Auto Works Inc

Motor oil can be a confusing beast that results in a number of questions. Do I really need synthetic? Does my new car take conventional? Understanding the basics of the different types of oil will help you answer these questions.

Synthetic motor oils are designed to excel at extreme temperatures. Regular motor oils are mineral-based: they come from crude oil that is taken out of the ground and run through a refinery. Synthetics, on the other hand, are man-made in a chemical plant. They tend to be more consistent in viscosity over various temperatures.

While synthetics can improve your engine performance, they don't eliminate the need for regular oil changes. Synthetics can handle heat better than regular motor oil, but additives can only work for so long and the engine will still contaminate the oil.

You see those cryptic combinations of letters and numbers on motor oil bottles everywhere. What do they mean? To decipher them, you have to understand viscosity. Viscosity measures how much the motor oil can resist flow. In other words, if you tip a motor oil bottle over, how fast it spills out indicates its viscosity. The more viscous, the slower it moves.

Octane. You see the word every time you visit the gas station but what does it mean? Octane ratings measure fuel's ability to resist engine knock. Engine knock is caused by fuel being ignited by something other than the spark plug.

Before you buy your next light bulb you should know the ins and outs of halogen bulbs! Most new-model vehicles have halogen headlights because they produce more light than a regular bulb. Be careful: like all halogen lights, touching the glass bulb means that bulb is contaminated with oil that can heat up and cause burnouts more quickly.

This simple barrier of accordion-folded paper may look insignificant but it's responsible for providing clean air to your vehicle's cylinders. This is important because air is just as crucial as fuel in the combustion process that powers the engine. Air is drawn through the engine air filter, then the air intake manifold and into the cylinders. There, it mixes with fuel to create the small explosions that power your vehicle.

A dirty engine air filter can prevent the cylinders from drawing in enough air, which throws off the fuel/air mix. This can result in poor fuel economy.

Every so often you notice it: The transmission shifts a little late, or maybe it seems to miss a gear entirely. Then it’s okay again… for a little while. Worst of all, there’s no rhyme or reason behind the condition. One minute it’s fine, the next it’s not. So you pop the hood to check the transmission fluid level. Then you notice it: A big mountain of corrosion on the battery terminals. You’ll have to take care of that, but it can’t have anything to do with the transmission, right?

Prevention is better than cure. You've probably heard that said plenty of times. The phrase is most often used to talk about health and medicine, but it is just as valid to apply it to vehicles. It's great if your problem can be sorted without much trouble, but even better not to have a problem in the first place. This is especially true when it comes to your vehicle's transmission, as this can be one of the more specialized parts to repair. Not all transmission problems require an extensive overhaul, but they will all cause at least some trouble and inconvenience. Avoiding transmission problems is clearly preferable to even the problems that are quickest and cheapest repair. This is why it is important to ensure you take good care of your transmission. This will help prevent problems and keep it working smoothly. Ideally, it will mean that it doesn't develop any faults at all. Even if it does eventually go wrong, however, it is entirely possible that good care will mean the fault is less serious and easier to repair than it would have been otherwise.

Your transmission suddenly isn’t shifting right. So what’s wrong with it? Do you need your transmission rebuilt? Good question. Unfortunately, the answer is: No one knows. At least, not yet. To find out what’s causing your transmission problem, a technician is going to have to perform a series of tests. Basically, these tests are designed to answer the simple question: “Is it inside or outside?” That is, is the problem inside the transmission, or in one of the many control systems that operates the transmission?